CP-Series / The Baseline
CP-ORIGINDesktop femtosecond laser workstation
CP-ORIGIN turns your ultrafast laser into a Class 1 benchtop micromachining station. The galvo scanner does the work within its 44 × 44 mm field, on a fixed sample plate with manual focus. It is the simplest way to start femtosecond processing in your own lab, and it upgrades in the field to CP-NEXUS and CP-VERTEX.
Laser not included. Your laser stays on the bench and docks through the periscope arm.

What you get
- Class 1 enclosure on a metrology basePolymer concrete or granite base damps vibration for micron-level work.
- Galvo scanner, 44 × 44 mm fieldInertia-free beam steering with < 1 µm optical repeatability.
- Fixed sample plate, XY-ready200 × 200 mm plate with M6 grid. Motorized stages fit later.
- Manual Z focus150 mm hand-wheel travel for samples, jigs and fixtures up to 25 kg.
- Rotating periscope armYour laser stays on the bench. 40 to 300 mm beam height.
Ideal for

CP-ORIGIN specifications
Preliminary specifications, subject to change. Final performance depends on the laser source and optical integration.
Motion and focus
- Sample plate
- 200 × 200 mm, M6 grid, fixed (XY-ready)
- Z axis
- 150 mm manual (hand-wheel), 25 kg load
- Beam stabilization
- Not included, added with the CP-Motion kit
Optics and laser interface
- Scan field
- 44 × 44 mm (f = 100 mm, telecentric)
- Optical repeatability (galvo)
- < 1 µm
- Beam delivery
- Rotating periscope arm, 40 to 300 mm beam height, light-tight docking
- Laser interface
- SMA fast trig/gate (pulse-on-demand), analog 0 to 10 V
Safety and platform
- Laser safety
- Class 1 laser product, no laser safety room needed
- Safety system
- Dual-channel interlocks, fast mechanical shutter, designed to ISO 13849-1 PL d
- Viewing window
- OD 7+ (EN 60825-4)
- Compliance
- CE and UKCA marking in preparation
- Metrology base
- Polymer concrete or granite
- Footprint (W × D × H)
- 600 × 700 × 800 mm, periscope arm and bridge +223 mm
- Door opening
- 496 × 426 mm
- Control
- PC control software and web HMI
3D model and dimensions
Switch between the three configurations to see what each one adds, open the door and move the scan head. Check how CP-ORIGIN fits on your bench and next to your laser.
Explore CP-ORIGIN in 3D
Switch between CP-ORIGIN, CP-NEXUS and CP-VERTEX, open the door and move the scan head. Simplified STEP files are included. Access requires a quick verification of your company or university email.

600 × 700 × 800 mm. Periscope arm and bridge add 223 mm on the right.
Download dimension drawing (PDF)One platform, field upgradeable
Every model shares the enclosure, metrology base, scanner and safety system. Upgrade kits install in the field.
Frequently asked questions
Is the laser included?
No. CP-Series workstations are sold without a laser source. Your laser stays on the bench beside the station and couples in free space through a rotating periscope arm (40 to 300 mm beam height) and a light-tight docking bridge. Turnkey integration is available on request.
Can CP-ORIGIN process areas larger than the scan field?
CP-ORIGIN works within the 44 × 44 mm galvo field. For larger areas, field stitching and step-and-repeat, the CP-Motion kit upgrades it to CP-NEXUS with motorized XY stages and motorized Z.
Can I upgrade CP-ORIGIN later?
Yes. CP-ORIGIN is a CP-VERTEX with modules left out and blanking plates in their place. The CP-Motion kit upgrades it to CP-NEXUS in the field, and the CP-Vision kit adds the CP-VERTEX vision and operator interface.
Which lasers can I use?
CW/QCW, nanosecond, picosecond and femtosecond sources. Pulses are synchronized over SMA (fast trig/gate, pulse-on-demand) and laser power can be modulated with an analog 0 to 10 V signal.
Do I need a laser safety room?
No. The station is a Class 1 laser product with dual-channel interlocks, a fast mechanical shutter and an OD 7+ viewing window, designed to ISO 13849-1 PL d. It runs on a standard lab bench without goggles.
How much does CP-ORIGIN cost?
Purchase pricing is shared as a budgetary quote on request. You can also rent CP-ORIGIN through the Try It Out program from €5,000/month and run your own process in your own lab.
Talk to an engineer about CP-ORIGIN
Tell us your laser, material and feature size. We reply with a configuration and budgetary quote.